How To Articles
Cleaning Forum
Link Sites
MSDS Documents
Contact
Information
Cleaning Articles
Floor Equipment
Automatic Scrubbers
Floor Burnishers
Floor Machines
Vacuum Cleaners
Carpet Extractors
Floor Sweepers
Wet Dry Vacuums
Tools, Hoses & Access.
Carpet Fans
NSS Schematics/Diagrams
Cleaning Products
Online Mega Store
Air Movers
Assorted bags
Auto Scrubbers
Brooms & Accessories
Brushes
Carpet Cleaning Products
Cleaning Chemicals
Disposable Wipers
Dusters
Floor Pads & Screens
Food Service
Facility Maintenance
Gloves
Hand Sanitizer
Housekeeping Supplies
Janitor Carts
Laundry Products
Material Handling
Matting
Mopping Equipment
NSS Equipment
Odor Control
Paper & Dispensers
Plungers & Bowl Brushes
Restoration Products
Restroom Cleaning
Safety Supplies
Personal Hygiene
Soaps & Dispensers
Sponges & Scrubbers
Sprayers And Pumps
Squeegees & Washers
Storage
Trash Can Liners
Waste Receptacles
SEARCH FOR ITEMS
Procedure For Light Floor Scrubbing
Procedure for Light Scrubbing Floor Finish/Seals Recommended Supplies and Cleaning Equipment: All Purpose, Low Foaming, Neutral Detergent/Cleaner Automatic Scrubber Floor Machine (175 RPM) With Tank and Shower Feed Brush Wet/Dry Vacuum Wet Floor Signs Mop Bucket and Wringer Mop Handle Wet Mop Heads (Medium to Large) Red Pad(s) Treated Dust Mop Dust mop Handle and Frame (36” to 72”) Dust Pan and Counter Brush Scraper/Putty Knife Walk-Off Mat Measuring Cup, etc. Rubber Gloves Recommended Method: As in all cleaning procedures, the first step is to gather the recommended cleaning equipment together and bring to the area to be cleaned. Automatic Scrubber: Prepare area – set up “caution” signs, mats, remove gum, etc. Dust mop floor area using a clean treated dust mop. Prepare automatic scrubber and add neutral detergent cleaner. Install red pad. Check pad pressure. Scrub the floor and pick up dirty solution using light pressure and a single pass. Mop up turn areas, puddles and tracks using all-purpose, low foaming detergent/cleaner solution. Allow to dry. Wash cleaning equipment and area, then burnish or recoat. Be sure to inspect your work and correct any steps you might have missed. Allow time to clean up and return the cleaning supplies to the storage area. Don’t forget to clean spray buff pads immediately. Finally, when you are finished, wash hands and dry thoroughly. Floor Machine with Tank and Shower Feed Brush: Prepare area – set up “caution” signs, mats, remove gum, etc. Dust mop floor area using a clean treated dust mop. In solution tank, prepare all-purpose low-foaming neutral detergent/cleaner solution. Attach shower feed brush to floor machine. Scrub floor area lengthwise along baseboards, and side to side over balance of area. Add solution as needed. Use wet vacuum to pick up dirty solution. Do not allow to dry while scrubbing. Mop up puddles, tracks, etc. Allow to dry. Wash cleaning equipment and area, then burnish or recoat. Be sure to inspect your work and correct any steps you might have missed. Allow time to clean up and return the cleaning equipment to the storage area. Don’t forget to clean spray buff pads immediately. Finally, when you are finished, wash hands and dry thoroughly.
Search For Cleaning Supplies And Cleaning Products On Our Online Store
Related Websites
Cleaning Supply Partner Sites
Mop Buckets and Wet Mop Supplies
Pet Stain And Odor Remover
Floor Pads And Sand Screens
Soap Dispensers
National Super Service Parts
Accepted At Monsterjanitorial.com
Home
Copyright ©2007 Monstercleaning.com Cleaning Supplies And Cleaning Supplies Specialists