Cleaning Products Main Banner

FLOOR EQUIPMENT

FLOOR EQUIPMENT PARTS

CLEANING PRODUCTS

GREEN CLEANING PRODUCTS

RESTROOM PRODUCTS

COOL CLEANING PRODUCTS

CLEANING MSDS LIBRARY

CLEANING ARTICLES

PRODUCT REVIEWS

CLEANING FORUM

CONTACT INFORMATION

HOT DEALS

SEARCH PRODUCTS

     LOG IN

  
Cleaning Products Icon

Procedure for Floor Stripping Water Base Finish and Seals

Recommended Supplies and Cleaning Equipment:

All Purpose, Low Foaming, Detergent/Cleaner

No Rinse Stripper

Automatic Scrubber

Floor Machine (175 RPM)

Wet/Dry Vacuum

Wet Floor Signs

Mop Bucket and Wringer

Mop Handle

Wet Mop Heads (Medium to Large)

Black Stripping Pads/Nylon Grit Stripping Brushes

Treated Dust Mop

Dust mop Handle and Frame (36” to 72”)

Dust Pan and Counter Brush

Scraper/Putty Knife

Walk-Off Mat

Measuring Cup, etc.

Rubber Gloves

Recommended Method:

As in all cleaning procedures, the first step is to gather the recommended cleaning equipment together and bring to the area to be cleaned.

Automatic Scrubber:

Prepare area – set up “caution” signs, mats, remove gum, etc.

Dust mop floor area using a clean treated dust mop.

Prepare automatic scrubber and add stripping solution. Install black pad or nylon grit stripping brush on scrubber. Check pad pressure.

Scrub the floor and pick up dirty solution using light pressure and a single pass. Mop up turn areas, puddles and tracks using all-purpose detergent/cleaner solution. Allow to dry.

Recoat with seal or finish.

Be sure to inspect your work and correct any steps you might have missed.

As in all cleaning procedures, allow time to clean up and return the cleaning equipment to the storage area. Don’t forget to clean spray buff pads immediately. Finally, when you are finished, wash hands and dry thoroughly.

Floor Machine and Pad:

Prepare area – set up “caution” signs, mats, remove gum, etc.

Dust mop floor area using a clean treated dust mop.

Add stripper to mop bucket. Scrub floor area lengthwise along baseboards and side to side over balance of the area. Add stripper as needed Use wet vacuum to pick up dirty solution. Do not allow to dry. Mop up puddles, tracks, etc. Allow to dry.

Recoat with seal or finish.

Be sure to inspect your work and correct any steps you might have missed.

As in all cleaning procedures, allow time to clean up and return the cleaning equipment to the storage area. Don’t forget to clean spray buff pads immediately. Finally, when you are finished, wash hands and dry thoroughly.

 

Cleaning Products Icon CLEANING ARTICLES

Cleaning Product Information

ADA Signs
Air Sanitizer
Antibacterial Soap
Ashtray Sand
Bar Soap
Brooms
Carpet Bonnets
Carpet Fans
Cleaning Sponges
Corn Brooms
Cup Dispensers
Deck Scrub Brush
Disposable Gloves
Disposable Wipers
Dust Mop Frames
Dust Mops
Dust Pans
Feather Dusters
Facial Tissue
Floor Cleaner
Floor Finish
Floor Mats
Floor Pads
Furniture Polish
Glass Cleaner
Hand Dryers
Hand Sanitizer
Janitor Carts
Kitchen Towels
Latex Gloves
Metal Sponges
Mop Buckets
Mop Heads
Paper Towel Dispensers
Paper Towels
Printed Urinal Screens
Pumice Soap
Push Brooms
Recycling Containers
Roll Towels
Sanitary Napkins
Scouring Pads
Scrub Brushes
Smoking Urns
Soap Dispensers
Stainless Steel Polish
Toilet Bowl Mops
Toilet Seat Covers
Toilet Paper
Trash Can Liners
Trash Cans
Urinal Blocks
Urinal Screens
Utility Pads
Vinyl Gloves
Wet Floor Signs
Window Squeegees

Cleaning Products

 

 

 

 

 

Clarke Floor Equipment

NSS Floor Equipment

Taski Floor Equipment

Tennant Floor Equipment

Tornado Floor Equipment

Windsor Floor Equipment

Cleaning Products

Clarke Parts

NSS Parts

Taski Parts

Tennant Parts

Tornado Parts

Windsor Parts

Cleaning Products

All Other Floor Equipment Parts

 

COPYRIGHT ©2009 MONSTERJANITORIAL.COM