Procedure for Spray Buffing Floors with Low Speed Buffer

Procedure for Spray Buffing Floors with Low Speed Buffer Recommended Supplies and Cleaning Equipment: All-Purpose Detergent/Cleaner Spray Buff Solution Floor Machine (175-400 RPM) Red Floor Pad Wet Floor Signs Mop Bucket and Wringer Mop Handle Wet Mop Heads (Medium to Large) Treated Dust Mop Dust mop Handle and Frame (36” to 72”) Dust Pan and Counter Brush Scraper/Putty Knife Mats Rubber Gloves Recommended Method: As in all cleaning procedures, the first step is to gather the recommended cleaning equipment together and bring to the area to be cleaned. Dust mop floor area using a clean treated dust mop. Prepare to damp mop – set up “caution” signs in public areas. Place mats at entrances. Damp mop floor area. Mist spray buff solution over a 4’ by 5’ area. Buff the area in a crosswise motion (forward and backward, and sideways), until gloss is restored. Repeat every 20 square feet. Turn the spray buff pad over after 200 square feet or sooner, if soil build-up is heavy. Repeat spray buff operation, changing pads as required, until entire area is spray buffed. Dust mop floor area again using a clean treated dust mop. Be sure to inspect your work and correct any steps you might have missed. As in all cleaning procedures, allow time to clean up and return the cleaning equipment to the storage area. Don’t forget to clean spray buff pads immediately. Finally, when you are finished, wash hands and dry thoroughly.   Search For Cleaning Supplies And Cleaning Products On Our Online Store

Related Websites

Cleaning Supply Partner Sites Mop Buckets and Wet Mop Supplies Pet Stain And Odor Remover Vacuum Cleaners Floor Pads And Sand Screens Soap Dispensers National Super Service Parts

Accepted At Monsterjanitorial.com

Copyright ©2007 Monstercleaning.com Cleaning Supplies And Cleaning Supplies Specialists