|
NSS
National Super Service Company Charger 1500 Burnisher
For NSS online
ordering and pricing please visit us at
http://www.monsterjanitorial.com
The Charger 1500 is a
signature machine in the NSS® line. This burnisher represents the
very definition of versatility— at 1500 RPM, it can burnish, spray
buff, and damp strip. An aggressive pad speed and rugged
construction enable it to produce that ultra-gloss “wet-look”
shine year after year. The 1.5 HP motor has more than enough
power for any floor care job, and will not bog down during really
tough tasks. The structural foam, rigid-back pad driver is
factory aligned to compress the pad for maximum burnishing
performance. This also reduces the The handle is removable
for transportation, and can be reversed for Built for the
rigors of daily commercial use, the Charger 1500 features a cast
aluminum base, 1.5-in. diameter steel handle, and heavy-duty metal
An optional wheel carriage allows the Charger to be easily
transported electric load, allowing the machine to operate on a
15-amp circuit. storage. The hand grips are positioned at the
ergonomically optimal angle of 10 degrees. cord strain relief. on
stairs.
Dual switch levers allow easy control
of the machine. Reset circuit breaker protects motor against operator
induced overloads. 1.5 in. diameter steel handle is removable for
machine transport and reverses for machine storage. Mechanical
lock-out prevents accidental starts and unauthorized use. Cord wrap
hook makes cord storage easy and convenient. 1.5 HP motor for long
life and aggressive burnishing. Heavy-duty metal cord strain relief
protects the 75- foot safety yellow cord from being pulled out. The
bearing is mounted in a pillow block for low heat rise and extended
life. The virtually indestructible polished cast-aluminum base is
offset for under counter burnishing. Non-marking bumper protects walls
and baseboards. Wheel carriage (standard on Model No. 5205234)
simplifies machine transport and pad changes. Structural-foam,
rigid-back pad driver maximizes burnishing performance.
Ergonomically angled handgrips mean less fatiguing operation. The pad
driver on the Charger 1500 is angled to the floor to compress the pad,
increasing the burnishing effect. This method also reduces pad drag,
allowing the machine to operate on a 15 amp circuit.
CHARGER 1500 CORD ELECTRIC BURNISHER
Built to be the best, the versatile Charger 1500 20" allows you to
burnish and spray buff. Strong enough to use for damp scrubbing
(remove worn top coats of finish without flood stripping) prior to
recoating. Exceptionally quiet and super dependable. 1500 RPM pad
speed gives a "wet-look" shine. Safety lockout. Pad driver built-in.
CORD ELECTRIC 115-V BURNISHER
CHARGER 1500 with built-in Pad Driver and 75' Cord
5205232 CHARGER 1500 with built-in Pad Driver and 75' Cord
20" 1500 RPM Burnisher
5205234 CHARGER 1500 with built-in Pad Driver and 75' Cord
20" 1500 RPM Burnisher with Wheel Carriage
REPLACEMENT ITEMS
5294151 Pad Holding Cup
CHARGER 1500 ACCESSORIES
5294449 Wheel Carriage (For Charger 1500 Only ) |
Cleaning How
To Articles
Janitorial
Supplies Partner Sites