|
NSS
National Super Service Company Charger 2176 AB Burnisher
For NSS online
ordering and pricing please visit us at
http://www.monsterjanitorial.com
A wide, productive
walk-behind battery burnisher, the Charger 2716 AB produces a
wet-look shine previously only attainable with a propane buffer,
but without the high maintenance requirements, noise, emissions,
and safety concerns. 3-HP pad drive motor for 3 hours of
maximum power. 0-70 pounds of pad pressure for that
brilliant, high gloss shine. Quiet operation (only 71 dbA)
means minimal disruption to customers and co-workers. PRO
eye battery fluid level indicator, standard on NSS batteries,
allows the operator to see at a glance when water needs to be
added to a battery. Sturdy, 7-gauge steel frame provides a
strong, rugged structure. Low profile pad driver makes
burnishing under shelves easy. Vac-Trac TM Dust Collection
System collects the pad dust created by burnishing.
36-Volt battery system for extended
runtime between charges. The battery cover lid slides forward on a
steel rail for quick access to batteries and dust control paper filter
bag. With the Vac-TracTM Dust Collection System, powder is removed
through natural air movement by pad rotation. This powder is collected
in a paper filter bag located in the nose of the machine. 0-70 lbs. of
pad pressure for that brilliant high gloss shine. PRO eye battery
fluid level indicator, now standard on NSS batteries, allows the
operator to see at a glance when water needs to be added to a battery.
Using the tilt-lever at the rear of the machine, the Charger 2716 AB
can be tipped from its operating position... The paper filter bag has
a capacity of 115.5 in3. The durable rotocast polyethylene body
resists dents, cracks, and corrosion.
CHARGER 2716 AB BATTERY BURNISHER
The Charger 2716 AB is an affordable, highly productive battery
burnisher for large areas. Features: 27" buffing path; 1600 RPM pad
speed; a unique 3-HP brush drive motor; Vac-Trac internal dust
collection system; slide-off battery lid; low sidewalls for easy
battery removal or installation; built-in, angled pad driver;
Flexiwall Shield sealed with a nylon bristle brush; 90 amp reset
circuit breaker; low 71 dbA; 36-V. battery system for long run time
between charges; on-board battery charger.
BATTERY POWERED BURNISHER CHARGER 2716 AB with built-in Pad Driver,
and On-Board Battery Charger (115-V). 6402164 27" Burnisher with Three
(3) 12V 210 AH Batteries and Vac-Trac Dust Control. $5,588.00
BATTERY ACCESSORIES AND REPLACEMENTS
7692261 Low-Water Battery Alarm Battery-acid Level Sensor (12V)
4491061 12-V. 210 Amp Hour Battery (3 required) (Packed 3 per
Pallet) |
Cleaning How
To Articles
Janitorial
Supplies Partner Sites