|
NSS
National Super Service Company Charger 2716 DB Burnisher
For NSS online
ordering and pricing please visit us at
http://www.monsterjanitorial.com

The most productive
walk-behind battery burnisher available today, the Charger 2716 DB
Plus produces a wet-look shine, previously only attainable with a
propane buffer. Over 3-1/2 hours of run time for increased
productivity. 0-70 pounds of pad pressure for a brilliant,
high gloss shine. Quiet operation (only 71 dbA) means
minimal disruption to customers and co-workers. Two-wheel
drive with differential results in the most maneuverable 27”
battery burnisher available today. Variable-speed wheel
drive, forward and reverse, allows the operator to match the
machine’s drive speed to a comfortable working pace. 7-gauge
steel frame provides a strong, rugged structure. Low profile
offset pad driver makes burnishing under shelves easy.

The Vac-Trac Dust Control System
collects pad dust in a filter bag at the front of the machine (under
the sliding battery compartment lid). Using the tilt-lever at the rear
of the machine, the Charger 2716 DB Plus can be tipped from its
operating position... The battery cover lid slides forward on a steel
rail for quick access to batteries and dust control paper filter bag.
The durable rotocast polyethylene body resists dents, cracks, and
corrosion. Using the tilt-lever, the machine can tip from the
operating to the transport to the pad change position. The low
sidewalls on the Charger 2716 DB Plus allow easy installation and
removal of batteries. The Flexiwall shield surrounds the pad,
preventing cords and debris from entering the pad rotation area.
Because of its variable-speed wheel-drive differential, the Charger
2716 DB Plus is extremely maneuverable. The on-board battery charger
provides the convenience of charging the batteries anytime, anywhere.
BURNISHERS CHARGER 2716 DB PLUS BATTERY BURNISHER
The most productive walk behind burnisher available, this Charger
produces a wet-look shine previously only available with a propane
buffer. Features: 27" buffing path; 1600 RPM pad speed; 3-HP brush
drive motor; Vac-Trac internal dust collection system; slide-open
battery lid; variable wheel-drive propulsion; low sidewalls for easy
battery removal or installation; hour meter standard; Flexiwall Shield
sealed with a nylon bristle brush; 90 amp reset circuit breaker; low
71 dbA; 6-6V, 325 AH batteries in a 36-V. battery system; longest run
time between charges; on-board battery charger (115V).
BATTERY POWERED WHEEL DRIVE BURNISHER
CHARGER 2716 DB PLUS with Wheel Drive, built-in Pad Driver and
On-Board Battery Charger (115-V). 6402165 27" Burnisher with Six (6)
6V 325 AH Batteries and Vac-Trac Dust Control.
BATTERY ACCESSORIES AND REPLACEMENTS
7692141 Auto-Fill Battery Watering System
7692181 Low-Water Battery Alarm Battery-acid Level Sensor (6V)
2691501 6-V. 325 Amp Hour Wet Battery (6 Required) |